VALIDATION
The future of vehicle design is heavily dependent on validation engineers who can test the design in both virtual and physical environments. These engineers must have the ability to not just validate a few tests but also optimize the model and make hard decisions to meet the functional and performance requirements.
Why Goken
At Goken, we rely on the seamless interaction of computer-aided design (CAD) geometry with finite element analysis (FEA) simulation to provide our clients with the right product performance specifications. Goken’s expertise in computer-aided engineering (CAE) and computational fluid dynamics (CFD) will address your product performance requirement. Our simulation engineers validate the design virtually while our test engineers validate physically and correlate it back to the CAE by conducting component, system ad vehicle-level testing.
Where do we add Value?
Launch A New Program
If you are about to launch a new program, our validation engineers can work for hand in glove with your designers at the planning stage to help target-setting and ensure that you optimize the design early on.
Launch A New Program
If you are about to launch a new program, our validation engineers can work for hand in glove with your designers at the planning stage to help target-setting and ensure that you optimize the design early on.
Validate Engineering Designs
If you already have a product designed and require engineers with product or component level validation experience, our simulation engineers can support setting up finite element models (FEM), run the analysis, and summarize the results. Our test engineers can also map the test plan and conduct subjective and/or objective testing.
Validate Engineering Designs
If you already have a product designed and require engineers with product or component level validation experience, our simulation engineers can support setting up finite element models (FEM), run the analysis, and summarize the results. Our test engineers can also map the test plan and conduct subjective and/or objective testing.
Prototype Planning
If you plan to build a prototype and test it, we can advise before you spend millions of dollars on prototypes and physically testing the products
Prototype Planning
If you plan to build a prototype and test it, we can advise before you spend millions of dollars on prototypes and physically testing the products
Infrastructure Support
If you have the 3D model design complete but lack the right infrastructure for simulation, we can support it.
Infrastructure Support
If you have the 3D model design complete but lack the right infrastructure for simulation, we can support it.
Technical Capabilities
Goken offers CAE services for different industries ranging from consumer products to automotive to aerospace
Structural Analysis
Linear/Non-Linear Static & Dynamic, Body Rigidity, Joint Stiffness
NVH
Frequency & Acoustic & Sensitivity Simulations
Optimization
Topology for Lightweighting
Vehicle Dynamics testing – Steering, Suspension, Brake
Test mapping and setup, data acquisition for objective testing; and subjective testing for system and vehicle level
Vehicle Safety testing – Strength, Durability, Reliability
Test mapping and setup, data acquisition for component and system level
Our Process
Goken can support full analysis of components and mechanical systems from setting up models, analysing, summarizing and interpreting the results
01
Pre-Process
CAD data conversion, Mesh Modeling, Assign material properties, Apply Boundary Conditions and load cases
02
Process
Run simulations using different Solvers considering the Physics, load inputs, and assumptions based on the use case.
03
Post-Process
Summarize and interpret the results. Provide result maps and animations as needed.
VALIDATION
The future of vehicle design is heavily dependent on validation engineers who can test the design in both virtual and physical environments. These engineers must have the ability to not just validate a few tests but also optimize the model and make hard decisions to meet the functional and performance requirements.
Why Goken
At Goken, we rely on the seamless interaction of computer-aided design (CAD) geometry with finite element analysis (FEA) simulation to provide our clients with the right product performance specifications. Goken’s expertise in computer-aided engineering (CAE) and computational fluid dynamics (CFD) will address your product performance requirement. Our simulation engineers validate the design virtually while our test engineers validate physically and correlate it back to the CAE by conducting component, system ad vehicle-level testing.
Where do we add Value?
Launch A New Program
If you are about to launch a new program, our validation engineers can work for hand in glove with your designers at the planning stage to help target-setting and ensure that you optimize the design early on.
Launch A New Program
If you are about to launch a new program, our validation engineers can work for hand in glove with your designers at the planning stage to help target-setting and ensure that you optimize the design early on.
Validate Engineering Designs
If you already have a product designed and require engineers with product or component level validation experience, our simulation engineers can support setting up finite element models (FEM), run the analysis, and summarize the results. Our test engineers can also map the test plan and conduct subjective and/or objective testing.
Validate Engineering Designs
If you already have a product designed and require engineers with product or component level validation experience, our simulation engineers can support setting up finite element models (FEM), run the analysis, and summarize the results. Our test engineers can also map the test plan and conduct subjective and/or objective testing.
Prototype Planning
If you plan to build a prototype and test it, we can advise before you spend millions of dollars on prototypes and physically testing the products
Prototype Planning
If you plan to build a prototype and test it, we can advise before you spend millions of dollars on prototypes and physically testing the products
Infrastructure Support
If you have the 3D model design complete but lack the right infrastructure for simulation, we can support it.
Infrastructure Support
If you have the 3D model design complete but lack the right infrastructure for simulation, we can support it.
Technical Capabilities
Goken offers CAE services for different industries ranging from consumer products to automotive to aerospace
Structural Analysis
Linear/Non-Linear Static & Dynamic, Body Rigidity, Joint Stiffness
NVH
Frequency & Acoustic & Sensitivity Simulations
Optimization
Topology for Lightweighting
Vehicle Dynamics testing – Steering, Suspension, Brake
Test mapping and setup, data acquisition for objective testing; and subjective testing for system and vehicle level
Vehicle Safety testing – Strength, Durability, Reliability
Test mapping and setup, data acquisition for component and system level
Our Process
Goken can support full analysis of components and mechanical systems from setting up models, analysing, summarizing and interpreting the results
01
Pre-Process
CAD data conversion, Mesh Modeling, Assign material properties, Apply Boundary Conditions and load cases
02
Process
Run simulations using different Solvers considering the Physics, load inputs, and assumptions based on the use case.
03
Post-Process
Summarize and interpret the results. Provide result maps and animations as needed.
SOLUTIONS & SERVICES
Goken is an engineering and staffing solutions provider fuelled by exceptional talent who partners with companies to solve problems, accelerate development cycles and build better products.